Tilters and Upenders
Tilters, upenders and dumpers that turn bins, coils and heavy loads toward the worker or into a container. Standard models handle 2,000 to 60,000 lb and tilt 30 to 120 degrees, each quoted in writing.
- Lifts 2,000 to 60,000 lb
- Rated capacity
- 10 models
- Compared below
- Freight to your ZIP
- On your quote before you order
- Written quote
- Machine, options, freight and build time
Models
No model matches all of these. Clear a filter, or tell us the job and we will find the machine.
| Compare | Model | Rated capacity | Raised height | Lowered height | Platform length | Platform width | Availability | Get it |
|---|---|---|---|---|---|---|---|---|
90 Degree Hydraulic Tilter
Autoquip
|
2,000 to 6,000 lb | Ask us | 7 to 12 in | 44 to 52 in | 24 to 48 in | Made to order | Quote 90 Degree Hydraulic Tilter | |
90 Degree Rotator Non-Intrusive Tilter
Autoquip
|
2,000 to 15,000 lb | Ask us | 12 to 15 in | 36 to 84 in | 36 to 84 in | Made to order | Quote 90 Degree Rotator Non-Intrusive Tilter | |
90 Degree Upender
Autoquip
|
2,000 to 60,000 lb | Ask us | 10.5 to 21 in | 36 to 144 in | 24 to 144 in | Made to order | Quote 90 Degree Upender | |
Air Force Pneumatic Lift and Tilt Table
Autoquip
|
3,000 lb | 39.75 in | 15.75 in | 48 in | 36 to 48 in | Made to order | Quote Air Force Pneumatic Lift and Tilt Table | |
Air Force Pneumatic Tilter
Autoquip
|
3,000 lb | Ask us | 7.25 in | 40 to 54 in | 42 to 54 in | Made to order | Quote Air Force Pneumatic Tilter | |
AutoTilt Portable Tilter
Autoquip
|
2,000 to 4,000 lb | Ask us | 3.5 in | Ask us | Ask us | Made to order | Quote AutoTilt Portable Tilter | |
High Hinge Dumper
Autoquip
|
2,000 to 6,000 lb | Ask us | 0.375 to 0.5 in | 36 to 54 in | 40 to 60 in | Made to order | Quote High Hinge Dumper | |
Series 35 Tilter
Autoquip
|
2,000 to 8,000 lb | Ask us | 8 to 9 in | 38 to 54 in | 24 to 66 in | Made to order | Quote Series 35 Tilter | |
TiltLift Lift and Tilt Table
Autoquip
|
2,000 to 8,000 lb | 29 to 33 in | 6 to 10.81 in | 41.5 to 56 in | 17.5 to 60 in | Made to order | Quote TiltLift Lift and Tilt Table | |
Tork Non-Intrusive Tilter
Autoquip
|
2,200 to 8,000 lb | Ask us | 8.625 to 10 in | 48 to 60 in | 24 to 50 in | Made to order | Quote Tork Non-Intrusive Tilter |
Buying guide
Choose by what the load has to do, how heavy it is and how much floor you can give it. Send us the load and the job and we confirm the model.
Tilt, upend or dump
Tilters angle a container 30 to 90 degrees for loading and unloading. Upenders and rotators turn a load 90 degrees from flat to upright. The high hinge dumper tips its load 120 degrees over a high hinge into a raised bin.
Tilt angle
Standard angles are 30, 45, 89, 90 and 120 degrees. The Series 35 tilter comes at 30, 45 or 90 degrees, and the last digits of its model number give the angle. The Air Force tilters tilt 30 degrees, and the AutoTilt stops at 89 degrees so it does not tip product out. Pick the angle that brings the far side of the bin within reach.
Capacity and floor space
Standard models handle 2,000 to 60,000 lb. Non-intrusive tilters, such as the Tork and the 90 degree rotator, keep the load inside their own footprint. A 90 degree upender needs room for both of its decks. The upender takes up to 60,000 lb for coils and dies, and the Series 35 tilter covers 2,000 to 8,000 lb bins and baskets.
Power
Most tilters are hydraulic. The Air Force tilters run on shop air with no oil, and the AutoTilt runs on a 12 volt battery and rolls between stations. Hydraulic tilters come with controls prewired and the drive on board, so they are lagged to the floor and connected to power.
What to send for a quote
- The heaviest load and its size, bin, basket, pallet or coil
- Where its center of gravity sits
- The tilt angle or the dump height you need
- The power at the site, or shop air
- Your delivery ZIP code
Questions
Can a tilter also lift?
Yes. The TiltLift and the Air Force lift and tilt table raise and tilt in one unit. The Series 35 tilter can also mount on a Series 35 lift table, sold as a separate unit.
What does non-intrusive mean?
The platform tilts inside the tilter's own footprint, so the load stays centered over the base frame and the tilter takes less floor space.
What happens if the power fails with a load tilted?
The 90 degree upender and the high hinge dumper have manual override valves that lower a partly tilted load after a power loss.
What is the difference between a tilter and an upender?
A tilter angles a bin or container toward the worker. An upender turns a load 90 degrees from flat to upright, such as a coil or a die, and a dumper tips its load into a raised container. Standard models tilt 30 to 120 degrees and handle 2,000 to 60,000 lb.
How do I get a price?
Call us or send the form. Tell us what you move, the route and your ZIP. We send a written quote with the machine, freight and build time.
How does it arrive?
Most machines go by freight truck from the factory. Parts and smaller items can go by FedEx or UPS. Freight to your ZIP is on your quote before you order. Rush and overnight shipping cost extra. We sell and ship to US addresses only.
What warranty comes with it?
EK Tech covers Pony Express tuggers for 2 years on the frame and drive and 1 year on other parts. For DJ Products and Autoquip equipment, ask us.
Get a written quote
Get a written quote
Tell us what you need. We call you back with a written quote.