Pony Express 1050-EL Motorized Scissor Lift Cart
1,000 lb Load capacity
- Top speed
- 3 mph
- Battery
- AGM
In stock
Scissor Lift Carts
Motorized scissor lift carts, also called mobile lift tables, drive a load to where it is needed and raise it to working height. They lift 1,000 to 2,500 lb in plants, warehouses and labs, and every cart is quoted in writing.
8 models carry it
By load
Not sure of the weight? Add the cart and its heaviest load, then call us with the total.
No model matches all of these. Clear a filter, or tell us the job and we will find the machine.
1,000 lb
1 model
2,000 lb
3 models
-
Pony Express 1052-2000-24 Motorized Scissor Lift Cart
2,000 lb Load capacity
- Top speed
- 3 mph
- Battery
- AGM
In stock
-
Pony Express 1052-2000-36 Motorized Scissor Lift Cart
2,000 lb Load capacity
- Top speed
- 3 mph
- Battery
- AGM
In stock
-
Pony Express 1052-2000-48 Motorized Scissor Lift Cart
2,000 lb Load capacity
- Top speed
- 3 mph
- Battery
- AGM
In stock
2,500 lb
3 models
-
Pony Express 1052-2500-24 Motorized Scissor Lift Cart
2,500 lb Load capacity
- Top speed
- 3 mph
- Battery
- AGM
In stock
-
Pony Express 1052-2500-36 Motorized Scissor Lift Cart
2,500 lb Load capacity
- Top speed
- 3 mph
- Battery
- AGM
In stock
-
Pony Express 1052-2500-48 Motorized Scissor Lift Cart
2,500 lb Load capacity
- Top speed
- 3 mph
- Battery
- AGM
In stock
Capacity on request
1 model
-
Pony Express 1052 Motorized Scissor Lift Cart
Ask us Load capacity
- Top speed
- 3 mph
- Battery
- AGM
In stock
Where it works
-
Plants
Parts and dies raised to press and bench height.
-
Warehouses
Cartons lifted to conveyor and shelf height.
-
Assembly
Work held at the right height at each station.
-
Packaging lines
Product raised to the packing and conveyor level.
Buying guide
Pick a scissor lift cart by the weight it lifts, the height it has to reach, the platform the load needs and how the cart moves with the load raised.
Lift capacity
The 1050-EL lifts up to 1,000 lb on a flat surface. The 1052 comes in 2,000 and 2,500 lb builds, and higher capacities are engineered on request.
Lift height and travel
The 1050-EL rises from 18.5 to 64 inches in about 17 seconds. The 1052 starts at 17.5 inches and rises to 41.5, 53.5 or 65.5 inches with 24, 36 or 48 inches of travel, in 7 to 21 seconds depending on the build.
Measure the height of the bench, press or conveyor the load goes to, and choose the travel that reaches it. Check the lowered height too, because the platform has to sit low enough to load from the floor, a pallet or a cart.
Platform and tops
The 1050-EL platform is 23 by 43.5 inches. The 1052 platforms are 26 inches wide and 40, 48 or 64 inches long as standard, up to 36 by 84 inches. Ball transfer, rotating, conveyor and stainless steel tops are available, and accordion skirting closes off the scissor mechanism.
Driving with the load raised
The 1052 limits drive speed to a quarter of normal whenever the platform is off its lowest position, and it can be set to stop all travel while raised. The 1050-EL is rated for a 6 degree incline. Both stop and hold when the operator lets go.
What to send for a quote
- The weight and size of the load
- The lowest and highest working heights
- The platform size and any top you need
- The floors and ramps on the route
We check the route against what you send and come back with a written quote for the cart, options, freight and build time.
Questions
Is a scissor lift cart the same as a lift table?
No. A lift table stays where it is installed. A scissor lift cart drives itself, so the same cart moves the load and lifts it at the destination.
How far does a lift cart go on a charge?
The 1050-EL gives up to 10 miles of operation per charge and the 1052 up to 5 miles. A higher capacity battery pack is available on the 1052.
Can the top be customized?
Yes. Ball transfer, rotating, conveyor and stainless steel tops are available, along with safety skirting, sensing edges and a foot control switch.
How high does a scissor lift cart raise the load?
The 1050-EL lifts 1,000 lb from 18.5 to 64 inches. The 1052 lifts 2,000 or 2,500 lb with 24, 36 or 48 inches of travel on platforms up to 36 by 84 inches.
How do I get a price?
Call us or send the form. Tell us what you move, the route and your ZIP. We send a written quote with the machine, freight and build time.
How does it arrive?
Most machines go by freight truck from the factory. Parts and smaller items can go by FedEx or UPS. Freight to your ZIP is on your quote before you order. Rush and overnight shipping cost extra. We sell and ship to US addresses only.
What warranty comes with it?
EK Tech covers Pony Express tuggers for 2 years on the frame and drive and 1 year on other parts. For DJ Products and Autoquip equipment, ask us.
Get a written quote
Get a written quote
Tell us what you need. We call you back with a written quote.