Pony Express 1062-LS Linen and Laundry Tugger
SKU 1062-LS
Price by quote
In stock
- Front plate accepts hitches for standard linen carts and bulk bins
- Two speed modes, 1.5 mph for corridors and 3 mph for long hauls
- Up to 8 hours per charge, about 4 hours to recharge
Overview
The Pony Express 1062-LS is the linen and laundry configuration of EK Tech’s proven 1062 electric tugger. It hitches to the manual linen carts and bulk laundry trucks your facility already owns and tows up to 2,000 lb behind a single walking operator, so housekeeping staff stop straining against loaded carts on long corridor runs between the laundry room, service elevators, and guest floors.
Power comes from a 0.6 HP 24V DC drive running through foam filled non marking tires that will not scuff polished hospital or hotel flooring. Two speed ranges keep the machine safe indoors. A low mode tops out at 1.5 mph for tight service corridors and elevator lobbies while high mode reaches 3 mph for back of house hauls. The 35 Ah deep cycle AGM battery delivers up to 8 hours of operation and recharges in about 4 hours from any standard wall outlet through the onboard smart charger.
The front mounting plate accepts EK Tech’s full hitch catalog, from pintle and ball couplers to quick release pin hitches, so the 1062-LS can be matched to canvas basket trucks, poly box trucks, exchange carts, and rolling linen cages. Dead man throttle operation, an emergency stop, a horn, and an automatic holding brake that locks the load on ramps round out the safety package.
Like every Pony Express tugger the 1062-LS is welded from powder coated steel and built in the USA. For facilities that move heavier bulk loads the 5,000 lb Pony Express 1065-LS is the step up model.
Other specifications
| Model | Pony Express 1062-LS |
|---|---|
| Incline Rating | 30 degrees with derated load capacity |
| Drive | 0.6 HP 24V DC high torque motor |
| Speed Low Mode | 0 to 1.5 mph forward and reverse |
| Optional Battery | 70 Ah AGM package |
| Recharge Time | About 4 hours |
| Tires | Foam filled puncture proof non marking |
| Braking | Solid state regenerative with automatic holding brake |
| Parking Brake | Electromagnetic |
| Controls | IP54 rated thumb wheel controls with high and low speed switches |
| Horn | 68 dB standard with 115 dB option |
| Frame | Welded powder coated steel |
| Country of Manufacture | USA |
Specifications
| Towing capacity | 2,000 lb |
|---|---|
| Top speed | 3 mph |
| Run time per charge | 8 hours |
| Battery | 35 Ah deep cycle AGM |
| Charger | Onboard UL and cUL smart charger 120 to 240 VAC |
| Overall length | 25 in |
| Overall width | 24 in |
Quote request
Tell us what you need. We reply with price, freight and lead time.